Payment & Shipping Terms:
|Material:||ABS, POM||Flushing Rate:||2.7L/S|
|Discharge Size:||Three Inch||Operation:||Manual Flush, Auto Close|
|Flush Volume:||Adjustable||Flush Mode:||Dual|
Three Inch Toilet Dual Flush Valve Discharge Device For 1- Pc And 2- Pc
Three inch dual flush discharge device for 1-pc and 2-pc toilet
This dual flush valve is designed for toilets with a 3 inches discharge hole. This model is mainly used in America and compatible with most brands of 3 inches toilet in the market. With bigger discharge size, it can create much more powerful flush compared to standard 2 inches outlet flush valve. Normally the flush volume of a 2 inches dual flush valve toilet could be adjusted to 3/6LPF. For a 3 inches dual flush valve, it can be further reduced to 2.5/4.5LPF and keep the same or even better rinsing effect.
|Net weight:||370g +/- 3%|
|Installation height:||200mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||240mm - 320mm|
|Discharge size:||Three inch|
|Operation:||Manual flush, auto close|
|Body rotation:||360 degree|
|Flushing rate:||>=2.7 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||35 - 65 mm for full flush, 70 - 120 mm for partial flush|
|Overflow pipe:||Fixed height customized per requirements|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
If you want to have your own logo on the product, you can choose from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s the best place to show your logo or brand name. And the finish of these parts are chrome plated normally. Therefore, laser etching is the best match for this kind of silver finish surface. But please noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display the products on shelves, you may need to have the logo printed on the fill valve and / or flush valve, not only on the button or lever. You can consider to use silk printing, especially when you want to use vivid colors.
If you have higher requirements on the logo pattern and color combination, it’s better to choose the label. It’s 4 C color printed adhesive label in any pattern and size you need. Its disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent way to carry your logo on the product. But the MOQ will be higher than any other ways as it need to make some revision on the existing molds. Please remember not every position of the product could be carved with your logo. Only some positions is applicable. Please check with our sales team and get further help.