Payment & Shipping Terms:
|Material:||ABS, POM||Installation Height:||180mm|
|Discharge Hole:||Two Inch||Flushing Rate:||2.2L/S|
|Flush Volume:||Adjustable||Overflow Pipe:||Adjustable|
Cable Operated Toilet Dual Flush Valve , Wc Flush Valve For Uk Concealed Cistern
Cable operated toilet flush valve P07081 is designed specially for UK concealed cistern inside the bathroom furniture. It's fitted with smaller thickness seal washer at 4mm, which could increase the exposed length of outlet shank and make it easier for installation and pipe connection. Meanwhile, it uses longer wire at 400mm to provide enough flexiblity in installation. To compensate the smaller thickness of plastic lid, an EVA gasket is offered for push button installation.
|Material:||ABS, POM, rubber, silicone|
|Net weight:||370g +/- 3%|
|Installation height:||180mm (from the upper rim of gasket to the top)|
|Discharge hole:||Two inch|
|Operation:||Manual flush, auto close|
|Body rotation:||90 degree|
|Seal washer:||4mm thickness|
|Overflow pipe:||Height adjustable from 210mm to 330mm, min. adjustment scale 5mm|
|Flushing rate:||>=2.2 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Push button:||Compatible with lid hole dia. 18mm-50mm|
|Push button installation:||could be top / side / front mounted|
|Cable length:||400mm to match UK concealed cistern|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
We provide free samples for trial and evaluation. For sample shipping cost, we leave it negotiable. There’re various ways to send you samples:
If you want to have your own logo on the product, you can choose from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s the best place to show your logo or brand name. And the finish of these parts are chrome plated normally. Therefore, laser etching is the best match for this kind of silver finish surface. But please noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display the products on shelves, you may need to have the logo printed on the fill valve and / or flush valve, not only on the button or lever. You can consider to use silk printing, especially when you want to use vivid colors.
If you have higher requirements on the logo pattern and color combination, it’s better to choose the label. It’s 4 C color printed adhesive label in any pattern and size you need. Its disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent way to carry your logo on the product. But the MOQ will be higher than any other ways as it need to make some revision on the existing molds. Please remember not every position of the product could be carved with your logo. Only some positions is applicable. Please check with our sales team and get further help.