Payment & Shipping Terms:
|Material:||ABS, POM||Flushing Rate:||2.3L/S|
|Outlet Size:||2NPSM||Installation Height:||240mm|
|Flush Volume:||Adjustable||Flush Mode:||Dual|
|Alias:||Push Button Flush Valve||Application::||Dual Flush Cistern|
Dual Flush Toilet Valve For Double Flush Toilet In Two Pieces Structure
Dual flush toilet valve P0801BK is workable for two pieces W.C. with cistern from 280mm - 360mm. In principle, one cylinder flush valve could be installed in toilet of any heights provided the rod of the push button is long enough. However, it’s not recommended to do so for three reasons at least. One is the operation stability is low as the long rods may slip in operation. Second is the hand feeling will be heavy as it requires bigger force to trigger it. The third is the flush valve work life will be shortened if the top part of the flush valve is immersed in water in long time. In all, a W.C. should be installed with flush valve of right height.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||340g +/- 3%|
|Installation height:||240mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||280mm - 360mm|
|Outlet size:||2" for 2-pc toilet|
|Overflow pipe:||Height adjustable from 210mm to 330mm, min. adjustment scale 5mm|
|Flushing rate:||>=2.3 Liters per seconds|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||90 degree|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|
Trial order is welcome. When you need to test the market and or test our quality in more comprehensive way than sample evaluation, you can place a trial order to us.
We don’t have a rigid regulation of the quantity of a trial order. We’re quite flexible on this point. Any quantity is workable as long as we have the parts of model in stock. Please consult our sales team for the availability.
The quality of the trial order is uniform to that of the mass production. It’s not special making and have to be the same quality level. It should not be higher than normal because we cannot reach it in mass production and it’s kind of cheat for customer. Meanwhile it should not be lower otherwise it cannot stand for our quality and customer don’t like this kind of surprise.
Founded in 2007, Xiamen Xinnin Sanitaryware Technology Co., LTD is devoted to providing best sanitary fittings and related solutions to our valued customers. After 10 years of hard working and continues improvement, Xinnin has become one of leading manufacturers in the industry. We have the best raw material source, high-tech mold design, automatic production facilities and in-house inspection equipments. What’s more important, we have an experienced and ambitious team of R&D, QC and management.