Payment & Shipping Terms:
|Material:||ABS, POM||Flushing Rate:||2.3L/S|
|Outlet Size:||2NPSM||Installation Height:||200mm|
|Flush Volume:||Adjustable||Alias:||Toilet Cistern Flush Unit|
|Overflow Pipe:||Fixed||Application:||Double Flush Toilet|
One Piece Toilet Flush Valve For Low Flush Toilet With Duo Action Flush
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||340g +/- 3%|
|Installation height:||200mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||240mm - 320mm|
|Outlet size:||2" for 1-pc toilet|
|Flushing rate:||>=2.3 Liters per seconds|
|Overflow pipe:||Fixed height customized per requirements|
|Flush volume:||partial flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||360 degree|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|
One piece toilet flush valve P0709A is for one piece sanitary ware toilet. the installation height is 200mm from the upper rim of the sealing gasket to the top of the flush body. our dual flush valve are fitted with high grade silicon rubber flapper. each batch of the silicon flapper has to pass rigid tests including stretching, aging, temperature and deforming one month ahead of assembly at least. no defected material will be accepted and no compromise is made for critical parts.
If you want to have your own logo on the product, you can choose from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s the best place to show your logo or brand name. And the finish of these parts are chrome plated normally. Therefore, laser etching is the best match for this kind of silver finish surface. But please noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display the products on shelves, you may need to have the logo printed on the fill valve and / or flush valve, not only on the button or lever. You can consider to use silk printing, especially when you want to use vivid colors.
If you have higher requirements on the logo pattern and color combination, it’s better to choose the label. It’s 4 C color printed adhesive label in any pattern and size you need. Its disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent way to carry your logo on the product. But the MOQ will be higher than any other ways as it need to make some revision on the existing molds. Please remember not every position of the product could be carved with your logo. Only some positions is applicable. Please check with our sales team and get further help.